If you own a commercial property that was built before the year 2000 then there could be asbestos lurking inside.

Up until 1999 asbestos was a common building material that was used for a variety of purposes in construction. After it was found to be linked to a number of serious health conditions it was banned from use and legislation was put in place to regulate its management.

The Control of Asbestos Regulations 2012 state that it is the dutyholder’s responsibility to determine whether asbestos is present in a building and then ensure that it is managed safely.

As the owner of a commercial property, you should ensure that a survey is carried out to assess whether there is any asbestos present in your building.

Where could asbestos be lurking?

Key areas of your commercial property that may contain asbestos include:

• Sprayed interior coatings
• Water tank
• Insulation
• Partition walls
• Ceiling tiles
• Vinyl floor tiles
• Textured decorative coatings
• Roof, gutters and downpipes

Asbestos insulating board is a fireproof material that was commonly used in ceiling tiles, partition walls, fireproof doors, and lift shafts. To the untrained eye, it is difficult to tell an asbestos board apart from a non-asbestos one.

There is also a risk that the exterior of your building could feature asbestos cement. Asbestos cement is simply normal cement with asbestos mixed in. It was often used in the construction of roofs, downpipes, gutters, soffits and flues.

What to do if asbestos is found in your commercial property

If a survey does find asbestos present in your building, then you will be required to take measures to manage the risk to protect yourself and the building’s tenants.

The correct action to take will depend on the location of the asbestos and its extent and condition. Options for management may include monitoring, maintenance, removal or encapsulation.

To find out about how our spray foam can be used to encapsulate asbestos in commercial properties,give us a call on 0800 028 4042.